A curved top connects two elongated prongs in a single U-shaped body. Prong length, spacing and cross-section are key development points for insertion and positioning within an updo.
Custom Hair Pin with Hammered Two-Prong
Develop a distinctive hair accessory for your brand with this hammered two-prong hair pin. The featured design combines a continuous U-shaped zinc alloy body, an 18K gold-plated finish, and an irregularly textured surface. Two elongated prongs slide into buns and updos, while the curved top remains visible as a decorative accent. Customize the dimensions, texture, finish, logo, and packaging. Other material options are available for custom development, subject to structural review.
Proudct at a Glance
| Product Type | Two-Prong Hair Pin / French Hair Pin |
|---|---|
| Raw Material | Zinc Alloy |
| Finish | 18K gold plating |
| Length | Customizable |
| Plating | Electroplating, Customizable |
| Design | Continuous U-shaped body with two elongated prongs |
| Surface Texture | Irregular hammered-effect texture |
| Prong Ends | Rounded tips |
| Intended Use | Buns, updos and decorative hair styling |
| Alternative Materials | Brass, stainless steel and other material options available for custom development, subject to engineering review |
| Packaging | Individual Eco-Polybag / Velvet Pouch / Branded Custom Gift Box |
Design Detail
Structure
Visual Focus
An irregular hammered-effect surface extends across the curved top and both prongs. Raised and recessed areas catch the light differently, giving the gold-plated surface a varied appearance.
Wear & Placement
The two prongs pass through sections of hair to position the pin within a bun or updo. Holding performance depends on hair volume, styling technique and the approved dimensions, so samples should be assessed on the intended hairstyles.
Customization Options for This Design
Adjust the design details to suit your collection, target hairstyles and brand presentation.
Overall Length & Width
Adjust the overall proportions to suit your intended styling use and visual direction.
Prong Profile & Spacing
Develop the prong thickness, taper and spacing together to balance insertion, strength and positioning.
Surface Texture
Adapt the hammered pattern depth and coverage, or explore a smoother surface treatment.
Plating & Finish
Discuss gold, silver-tone, rose gold or other finishes, with approved color references and coating specifications.
Logo Placement
Review a suitable area for discreet branding. A small smooth section may be needed for legible engraving.
Manufacturing Notes for This Design
Key production considerations for the long prongs, curved top, and visible metal surface.
Prong Thickness & Taper
The transition from the curved top to the long prongs needs sufficient section thickness. Review the taper and minimum cross-section to reduce weak points and potential deformation or fracture.
Texture Depth & Hair Contact
The hammered appearance should preserve the intended relief without leaving sharp peaks, burrs or rough contact points. Inspect the inner surfaces and tips as well as the visible front.
Prong Spacing & Body Shape
Control the gap, alignment and overall curvature against the approved sample. Unintended twisting or uneven spacing can affect appearance and insertion.
Surface Preparation Before Plating
For the featured zinc alloy version, control casting defects and prepare the surface before plating. Polishing should refine contact areas while retaining the approved hammered pattern.
Typical Manufacturing Process
The following process applies to the featured zinc alloy version. Alternative materials may require a different production route.
1
Material & Tooling Preparation
1
Confirm the zinc alloy specification, product drawing and tooling requirements for the two-prong form.
2
Casting & Trimming
Cast the body using suitable tooling, remove gates and flash, and check that the prongs are fully formed.
3
Surface Refinement
Refine parting lines, edges and tips while preserving the specified hammered-effect texture.
4
Plating & Surface Finish
1
Apply the approved pretreatment and plating system to achieve the agreed color and surface appearance.
5
Inspection & Packaging
Check dimensions, prong condition, finish and agreed functional criteria before protective packing.
More Hair Pin Designs
Explore related structures and decorative styles for your next hair accessory collection.
Related Hair Accessories Categories
Explore more hair accessory categories for your next custom collection.
Quality Checks for This Product
Multiple checkpoints to ensure every hair pin meets your standards.
Material Verification
Check the metal and decorative component specifications against the confirmed order requirements.
Surface Inspection
Inspect visible surfaces for scratches, rough edges, plating defects and unwanted residue.
Prong Dimensions & Alignment
Measure the agreed length, spacing, thickness and body shape; check for unintended twisting.
Tip & Edge Finishing
Inspect both tips and hair-contact edges for sharp points, flash and rough areas.
Structural & Styling Evaluation
Assess the agreed strength criteria and trial the sample on the intended hairstyles for insertion and positioning.
Final Inspection
Check overall dimensions, decorative layout, appearance and packaging against the approved sample.
Product-Specific FAQs
Find answers about materials, customization, MOQ, and lead times for this floral hair stick.
What is the minimum order quantity?
Our standard starting MOQ is 30 pcs. The final MOQ for this hair pin depends on the selected components, finish and customization requirements. Please send your quantity and design details for confirmation.
How long do sampling and production take?
Typical sampling takes 7–15 days, and production takes 15–25 days after sample approval and order confirmation. New tooling or special decorative materials may require additional time.
Can this hair pin be customized in materials other than zinc alloy?
Yes. We can review brass, stainless steel and other material options for custom development. A material change may require adjustments to the prong thickness, shape, texture and manufacturing process. Pricing and tooling requirements will be confirmed after review.
Can you adjust the size for different hair volumes?
Yes. We can review the overall length, width, prong spacing and thickness for your intended hairstyles. Please share the target use and any reference dimensions. Sample trials are recommended before approving claims for particular hair types.
Can the hammered texture or gold finish be changed?
Yes. Texture depth, pattern coverage, color and finish can be discussed during development. Please provide a physical reference or an approved sample where possible. Plating specifications, including thickness where required, should be agreed before production.
Where can our logo be added?
Logo placement depends on the available surface area and texture. We can review a discreet location near the curved top or another suitable area. A smooth section may be needed to keep small lettering clear.
Tell Us About Your Hair Accessory Project
Share your target quantity, dimensions, decorative materials and finish requirements. Attach reference images or artwork so we can review the design and prepare a quotation.
Ready to Develop Your Hammered Two-Prong Hair Pin?
Share your design, target quantity and packaging requirements to discuss sampling and OEM / ODM production.