
When does surface mounting suit the design?
In a surface-mounted design, the metal rests on the face of the wooden drop. Choose this route when a visible layer or a slight shadow beneath the metal suits the collection. Specify the intended height using a side sketch or a physical reference.
If adhesive is proposed, ask how the bonding area is prepared with the selected wood finish. On the trial piece, inspect the narrow corners in ordinary light for visible residue, then turn the earring sideways to examine the exposed metal edges. Ask the factory how it will check attachment on samples made with the actual wood, finish and steel.
When is a recessed inlay worth sampling?
A recessed inlay fits into a pocket in the wood. It suits a design where the transition should feel close to level or where only a small amount of metal edge should show. On the drawing, specify whether the finished metal sits flush, slightly proud or slightly below the surrounding face.
Check an actual-size sample where the pocket narrows around the points of the motif. Look for a visible gap and feel the step at the boundary. Ask how much wood remains beneath the pocket and beside the nearest outside edge. On a small teardrop, those dimensions may influence whether the proposed recess is practical.
How can buyers compare two quotations fairly?

Give both suppliers the same artwork, drop size, finish, order quantity and target side profile. Ask each to identify sample or setup charges and unit pricing. For the recessed option, ask whether the price includes pocket machining and fitting. For the surface-mounted option, confirm what is included for placement, attachment and cleanup.
Review both samples from the front and side before choosing. For a paired design, use the guide to checking the assembled earrings to assess the finished pair. Send 96Jewelry a side sketch with your artwork and mark the transition you want the wearer to feel.
Auteur

Ertian Jiang (Jasper) est le fondateur de Haosen Metal Jewelry. Depuis ses débuts à 26 ans, il associe un solide savoir-faire artisanal à une compréhension fine du marché, deux piliers sur lesquels repose l’excellence de l’entreprise.
Ertian Jiang a commencé comme artisan, spécialisé dans les pierres semi-précieuses (agate, nacre et œil-de-tigre) et l’incrustation manuelle. Il a perfectionné la pose de pierres naturelles sur des supports métalliques, sans jeu ni défaillance de la colle. Son expérience directe de la vente lui a également permis d’échanger avec les acheteurs et de comprendre leurs difficultés face aux pierres qui se détachent et aux couleurs qui s’altèrent.

